Contact our Fence Experts: (215) 362-8200 info@fencecity.com
Blogs
Why should you use 54 inch Ultra aluminum fence for your swimming pool?
Why Use an Ultra Aluminum 54-Inch Tall Fence Around Your Pool? Installing a 54-inch tall Ultra Aluminum fence around your pool is a smart, safe, and code-compliant choice for enhancing the security, functionality, and aesthetics of your pool area. Here’s why it stands out: Key Reasons to Use Ultra Aluminum Fencing Around Pools 1. Meets Pool Safety Requirements • Height Compliance: Many local and national safety codes require pool fences to be at least 48 inches tall. The 54-inch Ultra Aluminum fence exceeds this requirement, providing an extra level of security. • Prevents Access: The vertical picket design and tight spacing make it difficult for children or pets to climb over or squeeze through. 2. Corrosion Resistance • Ultra Aluminum fencing is rust-proof and resistant to corrosion, making it ideal for the humid, wet conditions around a pool. Unlike steel, aluminum will not degrade over time due to exposure to water or pool chemicals like chlorine or salt. 3. Low Maintenance • The powder-coated finish ensures the fence retains its appearance without the need for frequent repainting, staining, or sealing. This saves time and money over the years. 4. Safety Features • Ultra Aluminum fences can be paired with self-closing gates and Magna Latch locking systems, which are essential for pool safety compliance. These features ensure the gate remains secure when not in use, reducing the risk of accidental entry. 5. Aesthetic Appeal • With its sleek, modern design and various color options, the Ultra Aluminum fence enhances the overall look of your pool area while blending seamlessly with landscaping and architecture. 6. Durability and Longevity • The high-quality aluminum alloy used in Ultra Aluminum fences is designed to last for decades, making it a cost-effective investment for your pool’s safety and aesthetic needs. Installation Process Installing your Ultra Aluminum 54-inch pool fence involves careful planning and adherence to local code requirements. Here’s a step-by-step guide: 1. Check Local Codes and Regulations • Before purchasing and installing the fence, verify the requirements with your local code enforcement office. Most regulations include: • Minimum fence height (typically 48 inches or more). • Maximum spacing between pickets (often 4 inches). • Gates that are self-closing and self-latching. • Placement away from climbable objects (e.g., furniture, trees). 2. Plan the Layout • Measure the perimeter of your pool area to determine how much fencing material you’ll need. • Mark the locations of the fence posts and gates with stakes. Ensure the gate is placed in a convenient location for pool access. 3. Gather Materials and Tools • Materials: Ultra Aluminum fence panels, posts, self-closing gates, Magna Latch hardware, concrete, screws, and caps. • Tools: Tape measure, post hole digger, level, string line, power drill, and saw (if cutting panels). 4. Prepare the Ground • Clear the area of debris and level the ground. • Use a string line to ensure straight fence lines and consistent post spacing. 5. Install Fence Posts • Dig post holes approximately 24-30 inches deep and 6-10 inches wide. • Place posts in the holes, ensuring they are level and aligned with the string line. • Fill the holes with concrete, leaving it to cure as recommended by the manufacturer. 6. Attach Fence Panels • Attach the Ultra Aluminum panels to the posts using screws or brackets. • Ensure the panels are level and meet the spacing requirements for safety codes. 7. Install Gates and Hardware • Attach the self-closing gate to the designated gateposts using hinges. • Install the Magna Latch system, ensuring the latch is at least 54 inches above the ground (as required by most codes) to prevent children from opening the gate. • Test the gate to ensure it closes and latches securely after each