Contact our Fence Experts: (215) 362-8200 info@fencecity.com
Blogs
Country Estates vinyl fence, style Spartan with 1-3/4' narrow spacing and New England Post Caps
Country Estates Vinyl Fence: Spartan Style with Narrow 3/4” Spacing The Country Estate Spartan style vinyl fence is an ideal solution for homeowners and property managers seeking a balance of safety, elegance, and durability. With its narrow 3/4-inch spacing, the Brandywine design provides enhanced security and meets the strict standards of the BOCA (Building Officials and Code Administrators) code for swimming pool fencing. Engineered for longevity and minimal maintenance, this American-made fence is a top choice for residential, commercial, and recreational applications. Key Features of the Brandywine Vinyl Fence 1. BOCA Code Compliance for Swimming Pools • The Brandywine fence complies with BOCA safety codes, which require pool fencing to: • Be at least 48 inches tall. • Have vertical picket spacing of less than 4 inches to prevent children from passing through. • Prevent climbing by ensuring horizontal rails are spaced appropriately. • Feature a self-closing gate with a childproof latch mounted at least 54 inches above the ground. 2. Durable Vinyl Construction • Constructed from high-quality, weather-resistant vinyl, the Brandywine style resists rot, warping, and cracking, ensuring it stands up to the test of time. • Its UV-protected finish prevents fading, keeping the fence looking new for years. 3. Aesthetic Appeal • The narrow 3/4-inch spacing provides a sleek, elegant appearance, blending seamlessly with any architectural style. • Available in a variety of colors and finishes, it can be customized to complement landscaping and exterior designs. 4. Low Maintenance • Vinyl requires no painting, staining, or sealing. Cleaning with soap and water is sufficient to maintain its appearance. 5. Environmentally Friendly • Country Estates fences are made with eco-friendly processes and recyclable materials, offering a sustainable fencing solution. Installation Guide for the Brandywine Fence Step 1: Plan and Prepare 1. Verify Local Codes: • Ensure the fence meets local regulations, including the BOCA code if installed around a swimming pool. 2. Measure the Area: • Measure the perimeter of the area to be fenced. Mark post locations with stakes, spacing them according to the fence panel dimensions (typically 6-8 feet apart). 3. Gather Materials and Tools: • Materials: Brandywine vinyl panels, posts, gates, self-closing hinges, childproof latches, and concrete. • Tools: Post hole digger, tape measure, level, string line, drill, and saw (if panels need trimming). Step 2: Install Fence Posts 1. Dig Post Holes: • Dig holes at each marked post location, approximately 24-30 inches deep and 6-10 inches wide depending on soil conditions and fence height. 2. Set the Posts: • Insert posts into the holes and fill with concrete, ensuring they are plumb and aligned using a string line. Leave the concrete to cure as recommended by the manufacturer. 3. Insert Post Caps: • Add post caps to protect the posts from water infiltration and provide a polished appearance. Step 3: Attach Fence Panels 1. Position Panels: • Slide the Brandywine panels into the routed holes in the posts or attach them using brackets if the posts are not pre-routed. 2. Level Panels: • Ensure each panel is level before securing it. Adjust as needed to maintain a uniform height along the fence line. 3. Secure Panels: • Use screws or locking tabs provided with the fence system to secure panels to the posts. Step 4: Install the Gate 1. Reinforce Gate Posts: • Gate posts may require additional reinforcement to handle the weight and frequent use of the gate. 2. Attach Self-Closing Hinges: • Position the gate between the posts, leaving a 1-2 inch gap on either side. Attach self-closing hinges using screws, adjusting the tension to ensure the gate closes automatically. 3. Install the Childproof Latch: • Mount the latch at leas